Â
Motorized PP 3 way ball valve consists of a electric actuator and a plastic 3-way ball valves, which can be made from different thermoplastic material such as UPVC/PPH/CPVC/PVDF. Electric actuator is attached to the valve's movable internal component. It can rotate a ball in the valve body, to align the cut-out channels in the ball with the inlets and outlets of the valve. The "L" shape cut-out of the ball on an L-port valve sends fluid through 90 degrees from one port to another. The "T" shape cut-out of the ball on a T-port valve can also send from one port to another, but can also be rotated so that the T aligns with the "T" shape of the valve and all three ports are mixed.. So this motorized PP 3 way ball valve can be used for flow diverting, mixing, or on/off isolation. They will replace a Tee + 2 valve linkage assembly at reduced cost and space, along with shorter installation and maintenance time. This motorized PP 3 way ball valve adopt food-grade and medical grade material as the body material, It is a customized valve designed for kidney dialysis machines, It can control the flow of blood and a special fluid that helps remove waste and excess substances from the blood during the dialysis process. This motorized PP 3 way ball valve in a kidney dialysis machine serves the crucial role of controlling the flow of blood either through the dialyzer for filtration or bypassing it for other necessary interventions. This flexibility allows for careful monitoring and adjustment of the dialysis process to ensure that the patient's blood is effectively cleaned while maintaining their overall health and stability during the treatment.
Â
Â
Fault cause
â— Power not connected
â— Voltage below level or incorrect
â— Terminal loose or poor contact
â— Over temperature protection of motor
Processing methods
â— Connect power
â— Check whether voltage is within the normal range
â— Check and correctly connect terminal
â— Check whether valve gets stuck or torque value is too big
Â
https://www.jwsmartvalve.com/